DISCLAIMER
1. Before drilling, check for electrical, gas, or water lines. Striking can cause injury, fire, or death
2. Confirm the wall or surface can support Gravity Grabbers and your stored gear (~15 lbs)
3. If you're unsure about wall structure or hidden obstructions, consult a professional
4. Do not install the Gravity Grabbers above people, walkways, or workspaces
General Tips
-
Testing
1. After installation, clear the area of valuables
2. Pick a hanging method and start with it
3. Insert gear using your chosen method
4. Check over 24 hours to make sure gear stays in place
5. If it shifts, try a different method and retest
-
Usage Requirements
1. Gear is dry
2. Product has no damage
3. Grabber and arms are level
4. Select the best hanging method
5. Area around Grabber is clear
Steps
1) Pick a wall spot about 6' high
2) Mount the board using the 2" silver screws
3) Align each Grabber with the board's pre-drilled holes
4) Secure them with the 5/8" screws
5) Tug each Grabber gently to confirm it's secure
Tips & Tricks
-
For skis, hang by the precision point where the skis are perfectly touching for maximum grip
-
Using a ski strap when hanging your skis, greatly reduces the chances of any movement
-
Hanging skis or snowboards with the top binding above Gravity Grabber ensures that no slippage occurs
-
The integrated pole hangers are equipped with holes to easily fasten a bungee to each side and over the gear for maximum security
HAVE QUESTIONS?
Submit a request to our customer service team and we'll get back to you as soon as possible, usually within one business day.